5-Axis Vertical Machining Centers UNIVERSAL CENTER MU-V series
- Innovations in volumetric accuracy
- Highly rigid trunnion table supports high-accuracy 5-axis machining
-
High quality machined surfaces with the high following of 5-axis machining
●Highly-rigid trunnion table supports both ends
●With ball-screw cooling (Std), reduced following error is achieved while maintaining highly accurate machining.
The indexing accuracies that take 5-axis machining to higher accuracies (MU-5000V Actual data)
●Indexing accuracy
- ・A-axis indexing accuracy/Indexing return accuracy: ±0.68 sec/±0.40 sec
- ・C-axis indexing accuracy/Indexing return accuracy: ±0.78 sec/±0.14 sec
●Fast operation
- ・A-axis/C-axis 90°clamp/unclamp indexing time: 1.0 sec/1.2 sec
- A 5-axis machine that really cuts
- Beyond the limits of conventional 5-axis machining
Highly efficient machining with amazing machining capacity - MU-5000V, MU-6300V Actual data ([ ]: MU-6300V specs)
-
- Face milling capacity: 504cm3/min (S45C)
-
●ø80 face mill 8 blade (coating)
- Spindle speed: 895min-1
- Cutting speed: 225m/min
- Feedrate: 2,250mm/min
- Cut width × infeed: 56 × 4mm
-
- End milling capacity: 672cm3/min (S45C)
-
●ø20 roughing end mill 7 blade (carbide)
- Spindle speed: 4,000min-1
- Cutting speed: 251m/min
- Feedrate: 4,800mm/min [2,800mm/min]
- Cut width × infeed: 7 × 20mm [12 × 20mm]
- Process-intensive machining with turning capacity that approaches that of a lathe
- Turning capacity: 3mm2 (S45C)
-
- Machining dia: ø164mm [ø250mm]
- Cutting speed: 130m/min (table rotation: 252min-1)
- Feedrate: 0.6mm/rev
- Infeed: 5mm
※ The above are actual examples. Your results may vary due to differences in specifications, tooling and cutting conditions.
- Get a real sense of the good visibility and
operability required in 5-axis machining - Superb operator access to the machining chamber
-
-
-
Structure allows easy tool edge confirmation during setup and machining
●Best table, spindle, and operation panel layout in terms of operability
-
Large step platform for easy working
●Operating stress reduced with large platform so that operator does not have to worry about footing
-
Large window for good visibility in machining compartment
-
-
-
-
- Large machining range; tools can be changed with
trunnion still in swing position - The tool reaches the end of the workpiece even with the table at various inclination angles, enabling wide-range 5-axis machining.Tools can be changed with the trunnion still in a swing position, leading to reduced cycle times and higher machining accuracies.
-
Machine Specifications
| Unit | MU-5000V〈-L〉No.40 spindle | MU-5000V〈-L〉No.50 spindle | ||
|---|---|---|---|---|
| Travels | X axis (table L/R) | mm (in.) | 800 (31.50) | |
| Y axis (spindle saddle front / back) | mm (in.) | 1,050 (41.34) | ||
| Z axis (spindle ram vertical) | mm (in.) | 600 (23.62) | ||
| A axis (trunnion swivel) | deg | +90 to -120 | ||
| C axis (table swivel) | deg | 360 (infinite) | ||
| Table surface to spindle nose | mm (in.) | 80 to 680 (3.15 to 26.77) | ||
| Table | Table size | mm (in.) | ø500 (19.69) | |
| Max work size | mm (in.) | ø700 × H500 (ø27.56 × H19.69) | ||
| Floor to table top | mm (in.) | 1,140 (44.88) | ||
| Max load capacity※ | kg (lb) | 500 (1,100) | ||
| (turning spindle speed) | min-1 | 〈1,000〉 | ||
| Spindle | Spindle speed | min-1 | 10,000 [15,000、20,000、25,000] 〈8,000、 [12,000] 〉 |
6,000 [12,000] 〈10,000〉 |
| Tapered bore | 7/24taper No.40〈HSK-A63〉 | 7/24taper No.50〈HSK-A100〉 | ||
| No. of spindle ranges | Infinitely variable | |||
| Bearing dia | mm (in.) | ø70 (2.76) | ø90 (3.54) | |
| Feed | Rapid traverse | m/min (ipm) | X-Y-Z: 50 (1,969) | |
| Rapid traverse | deg/min | A: 18,000 (50min-1) C: 18,000 (50min-1)〈36,000 (100min-1)〉 | ||
| Cutting feedrate | mm/min | X-Y-Z: 1 to 50,000 | ||
| Motors | Spindle (10 min/cont) | kW (hp) | 11/7.5 (15/10) [22/18.5 (30/25), 30/22 (40/30), 15/11 (20/15)] 〈11/7.5 (15/10), [22/18.5 (30/25)]〉 |
11/7.5 (15/10) [26/18.5 (35/25)] 〈26/18.5 (35/25)〉 |
| Feed axes | kW (hp) | X: 5.2 (6.9), Y-Z: 3.5 (4.7), A: 3.5 × 2 (4.7 × 2), C: 3.0 (4) 〈5.0 (6.7)〉 | ||
| ATC | Tool shank | MAS BT.40〈HSK-A63〉 | MAS BT.50〈HSK-A100〉 | |
| Pull stud | MAS2〈-〉 | |||
| Tool capacity (magazine) | 32-tool [48-tool, 64-tool: chain, Over 64-tool: matrix] | |||
| Max tool dia (w/adjacent / w/o adjacent) | mm (in.) | ø90/ø125 (ø3.54/ø4.92) | ø100/ø152 (ø3.94/5.98) | |
| Max tool length | mm (in.) | 400 (15.75) | ||
| Max tool weight | kg (lb) | 8 (17.6) | 12 (26.4) [15 (33)] | |
| Tool selection | Memory random (matrix magazine is fixed address system) | |||
| Machine size | Height | mm (in.) | 3,435 (135.24) | |
| Floor space W × D (w/o operator platform) | mm (in.) | 3,995 × 2,750 (157.28 × 108.27) | 3,995 × 2,840 (157.28 × 111.81) | |
| Weight | kg (lb) | 15,400 (33,880) | 15,650 (34,430) | |
| CNC | OSP-P300MA〈OSP-P300SA〉 | |||
[ ] : Optional
〈 〉: Turning specifications
※With APC specifications, there are limits on maximum pallet load and maximum workpiece dimensions
| Unit | MU-6300V〈-L〉No.40 spindle | MU-6300V〈-L〉No.50 spindle | ||
|---|---|---|---|---|
| Travels | X axis (table L/R) | mm (in.) | 925 (36.42) | |
| Y axis (spindle saddle front / back) | mm (in.) | 1,050 (41.34) (+100 ATC movements) | ||
| Z axis (spindle ram vertical) | mm (in.) | 600 (23.62) | ||
| A axis (trunnion swivel) | deg | +90 to -120 | ||
| C axis (table swivel) | deg | 360 (infinite) | ||
| Table surface to spindle nose | mm (in.) | 160 to 760 (6.30 to 29.92) | ||
| Table | Table size | mm (in.) | ø630 (24.80) | |
| Max work size | mm (in.) | ø830 × H550 (ø32.68 × H21.65) | ||
| Floor to table top | mm (in.) | 1,150 (45.28) | ||
| Max load capacity※ | kg (lb) | 600 (1,320) | ||
| (turning spindle speed) | min-1 | 〈800〉 | ||
| Spindle | Spindle speed | min-1 | 10,000 [15,000、20,000、25,000] 〈8,000、 [12,000] 〉 |
6,000 [12,000] 〈10,000〉 |
| Tapered bore | 7/24taper No.40〈HSK-A63〉 | 7/24taper No.50〈HSK-A100〉 | ||
| No. of spindle ranges | Infinitely variable | |||
| Bearing dia | mm (in.) | ø70 (2.76) | ø90 (3.54) | |
| Feed | Rapid traverse | m/min (ipm) | X-Y-Z: 50 (1,969) | |
| Rapid traverse | deg/min | A: 10,800 (30min-1)C: 32,400 (90min-1) | ||
| Cutting feedrate | mm/min | X-Y-Z: 1 to 50,000 | ||
| Motors | Spindle (10 min/cont) | kW (hp) | 11/7.5 (15/10) [22/18.5 (30/25), 30/22 (40/30), 15/11 (20/15)] 〈11/7.5 (15/10), [22/18.5 (30/25)]〉 |
11/7.5 (15/10) [26/18.5 (35/25)] 〈26/18.5 (35/25〉 |
| Feed axes | kW (hp) | X: 5.2 (6.9), Y-Z: 3.5 (4.7), A: 4.6 × 2 (6.1 × 2), C: 7.2 (9.6)〈16.0 (21.3)〉 | ||
| ATC | Tool shank | MAS BT.40〈HSK-A63〉 | MAS BT.50〈HSK-A100〉 | |
| Pull stud | MAS2〈-〉 | |||
| Tool capacity (magazine) | 32-tool [48-tool, 64-tool: chain, Over 64-tool: matrix | |||
| Max tool dia (w/adjacent / w/o adjacent) | mm (in.) | ø90/ø125 (ø3.54/ø4.92) | ø100/ø152 (ø3.94/5.98) | |
| Max tool length | mm (in.) | 400 (15.75) | ||
| Max tool weight | kg (lb) | 8 (17.6) | 12 (26.4) [15 (33)] | |
| Tool selection | Memory random (matrix magazine is fixed address system) | |||
| Machine size | Height | mm (in.) | 3,525 (138.78) | |
| Floor space W × D (w/o operator platform) | mm (in.) | 4,850 × 2,990 (190.94 × 117.72) | ||
| Weight | kg (lb) | 17,500 (38,500) | 17,700 (38,940) | |
| CNC | OSP-P300MA〈OSP-P300SA〉 | |||
[ ] : Optional
〈 〉: Turning specifications
※With APC specifications, there are limits on maximum pallet load and maximum workpiece dimensions
| Unit | MU-8000V〈-L〉No.40 spindle | MU-8000V〈-L〉No.50 spindle | ||
|---|---|---|---|---|
| Travels | X axis (table L/R) | mm (in.) | 925 (36.42) | |
| Y axis (spindle saddle front / back) | mm (in.) | 1,050 (41.34) (+100 ATC movements) | ||
| Z axis (spindle ram vertical) | mm (in.) | 600 (23.62) | ||
| A axis (trunnion swivel) | deg | +90 to -120 | ||
| C axis (table swivel) | deg | 360 (infinite) | ||
| Table surface to spindle nose | mm (in.) | 200 to 800 (7.87 to 31.50) | ||
| Table | Table size | mm (in.) | ø800 (31.50) × 630 (24.80) width 〈ø800 (31.50)〉 | |
| Max work size | mm (in.) | ø1,000 × H550 (ø39.37 × H21.65) | ||
| Floor to table top | mm (in.) | 1,210 (47.64) | ||
| Max load capacity※ | kg (lb) | 700 (1,540) | ||
| (turning spindle speed) | min-1 | 〈800〉 | ||
| Spindle | Spindle speed | min-1 | 10,000 [15,000、20,000、25,000] 〈8,000、 [12,000] 〉 |
6,000 [12,000] 〈10,000〉 |
| Tapered bore | 7/24taper No.40〈HSK-A63〉 | 7/24taper No.50〈HSK-A100〉 | ||
| No. of spindle ranges | Infinitely variable | |||
| Bearing dia | mm (in.) | ø70 (2.76) | ø90 (3.54) | |
| Feed | Rapid traverse | m/min (ipm) | X-Y-Z: 50 (1,969) | |
| Rapid traverse | deg/min | A: 10,800 (30min-1)C: 32,400 (90min-1) | ||
| Cutting feedrate | mm/min | X-Y-Z: 1 to 50,000 | ||
| Motors | Spindle (10 min/cont) | kW (hp) | 11/7.5 (15/10) [22/18.5 (30/25), 30/22 (40/30), 15/11 (20/15)] 〈11/7.5 (15/10), [22/18.5 (30/25)〉 |
11/7.5 (15/10) [26/18.5 (35/25)] 〈26/18.5 (35/25〉 |
| Feed axes | kW (hp) | X: 5.2 (6.9), Y-Z: 3.5 (4.7), A: 4.6 × 2 (6.1 × 2), C: 7.2 (9.6) | ||
| ATC | Tool shank | MAS BT.40〈HSK-A63〉 | MAS BT.50〈HSK-A100〉 | |
| Pull stud | MAS2〈-〉 | |||
| Tool capacity (magazine) | 32-tool [48-tool, 64-tool: chain, Over 64-tool: matrix | |||
| Max tool dia (w/adjacent / w/o adjacent) | mm (in.) | ø90/ø125 (ø3.54/ø4.92) | ø100/ø152 (ø3.94/5.98) | |
| Max tool length | mm (in.) | 400 (15.75) | ||
| Max tool weight | kg (lb) | 8 (17.6) | 12 (26.4) [15 (33)] | |
| Tool selection | Memory random (matrix magazine is fixed address system) | |||
| Machine size | Height | mm (in.) | 3,625 (142.72) | |
| Floor space W × D (w/o operator platform) | mm (in.) | 5,280 × 2,990 (207.87 × 117.72) | ||
| Weight | kg (lb) | 18,400 (40,480) | 18,600 (40,920) | |
| CNC | OSP-P300MA〈OSP-P300SA〉 | |||
[ ] : Optional
〈 〉: Turning specifications
※With APC specifications, there are limits on maximum pallet load and maximum workpiece dimensions